Black Box PC124C Installation Manual page 77

LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
Table 8--1 (continued). Problem-Resolution Guide.
Problem or Message
Printer does not print
COR
76
Probable Cause
APO feature is OFF and
orientation is set to COR, portrait
is set to COR, COR,
host override allowed,
or landscape
APO feature is ON and
page size is
8 1 ⁄ " x 14" or less
2
APO feature is OFF and
orientation is set to
portrait or landscape
APO feature is ON and
and orientation is set to
portrait or landscape
APO feature is OFF and
set to portrait or
landscape
APO feature is OFF
and orientation is set
to COR; COR, host
override allowed
AS/400 only: Rotation in
data-processing printer
file is set to *COR
and other host print
quality in printer file is
*STD
Action
Set Laser Card orientation to
Turn APO off or increase page
size so it is larger than 8
14"
Set orientation to COR
Turn APO off or increase page
size so it is larger than 8
14"
Set orientation to COR
Set orientation to COR or
change host settings (see the
APO/COR section, Block 5 in
Figure 6-1)
Set orientation to COR or
change host settings (see the
APO/COR section, Block 5 in
Figure 6-1)
1 ⁄ " x
2
⁄ " x
1
2