LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
Table 9-1 (continued). Host-Download Commands.
Description
Suppress IBM Control Codes
True LPI Spacing
Truncate/Wrap Select
Valid FF at End of Print Buffer
Valid FF Followed by Data
Vertical Channel Select (VCS)
9.2 Configuration Options
In the command descriptions an asterisk (*) identifies the factory-default selection.
Commands take effect immediately unless noted otherwise. Any errors cause the
interface to ignore the command and continue printing. For a command to be
permanently stored in permanent memory, the command Z99,0 must be used.
RPQs are only active in LU3 (non-SCS) mode.
COMMAND 1: BUFFER SIZE
Selects logical default buffer size.
VALUE
1
*2
3
4
5
82
*Factory-default setting.
DESCRIPTION
960 characters
1920 characters
2560 characters
3440 characters
3564 characters
Command
36
38
31
18
17
37