Restoring The Factory Defaults - Black Box PC124C Installation Manual

VALUE
0
1
2
If a document is printed using temporary host download commands
(commands not stored using the Z99,0 command), value 2 will restore
the permanent memory selections.
Put a &%Z98,2 at the end of the document to restore the standard setup
parameters for the next user of the printer.
The active setup and permanent memory setup selections are the same
after a Command Z99,0 or a Command Z98,2 is sent to the printer.
Example: &%Z98,1 Prints out the active setup selections for review.
COMMAND 99: SAVE ALL CURRENT SETTINGS
Saves all current settings specified through Host/PC download commands or
Setup Software into permanent memory.
VALUE
0
Example: &%Z99,0 saves all current settings to permanent memory.

5.5 Restoring the Factory Defaults

The factory default configuration can be restored to the non-volatile memory of
the interface by either a host download command Z98.0 or by performing the
following steps:
1. Press Menu repeatedly until TWINAX CARD is displayed.
2. Press Item - to display "98=TEST MENU."
LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
DESCRIPTION
Restores the factory setup
Prints out the active setup selections
Restores the setup selections stored in the permanent
memory to active status
DESCRIPTION
Save all current settings
NOTES
45