Paper Output Bin Selection - Black Box PC124C Installation Manual

LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
The next time you send a host print job that is to pull paper form the IBM
drawer #1, the printer will actually feed paper from the optional third 250-sheet
feeder.
The interface can be configured in a similar manner using host-download
commands. To accomplish the remapping described above, simply send the
command &%Z13,08 to the interface.
Up to 5 different IBM drawers can be mapped to your printer's paper input
trays. Review the following table for information on default settings and to
determine which command to use to change the tray mapping.
IBM Drawer #
1
2
3
4
5
Check your printer's user's guide to determine which PCL escape
sequence corresponds to the desired input tray.

6.9 Paper Output Bin Selection

The Laser Card allows you to direct host print jobs to available output bins.
To send a host job to a particular output bin, insert an I-O output command on
the first line (line 1, position 1) of the document/report. The output command
consists of the "logical not" (¬) or the "caret" (^) symbol followed by a capital letter
"O" (for Output) and a two-digit number designating a destination bin. The
two-digit number corresponds to the printer's PCL command for the particular
output bin.
52
Card's default
tray mapping
1
4
5
1
1
PCL
Command*
ESC&11H
ESC&14H
ESC&15H
ESC&11H
ESC&11H
NOTE
I-O Command
13
14
15
30
31