Black Box PC124C Installation Manual page 84

This command, along with the Z99,0 command, changes the logical
buffer size selection in the non-volatile memory of the interface. The
logical buffer size is only reported to the host the next time the unit is
powered up.
The physical buffer size is permanently set at 4K.
Example: &%Z1,3 sets logical buffer size to 2560 characters.
COMMAND 2: LINES PER INCH
Selects default LPI.
VALUE
3
4
*6
8
This default emulates the front-panel selection on an IBM printer.
The IBM host can control the LPI unless Command 36 is used to
override the host LPI commands.
Example: &%Z2,8 sets the printer to 8 LPI default
COMMAND 3: CHARACTERS PER INCH
Selects default CPI
VALUE
0
*10
12
15
16
*Factory-default setting.
LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
DESCRIPTION
DESCRIPTION
No default sent to printer
10 CPI
12 CPI
15 CPI
16.7 CPI
NOTES
3 LPI
4 LPI
6 LPI
8 LPI
NOTES
83