Black Box PC124C Installation Manual page 75

LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
Table 8--1 (continued). Problem-Resolution Guide.
Problem or Message
Extra blank sheets are
ejected between sheets
of printout
Form length is incorrect
Printer won't change
fonts.
Printer does not print in
landscape orientation
74
Probable Cause
Form length not correct
in software (maximum
length is 66 lines)
Page orientation was
changed
Form length incorrect in
software
Incorrect configuration at Make sure the host
the host
Incorrect typestyle
number.
Wrong optical fonts
loaded.
Font SIMM damaged or
not seated into the
printer properly
Did not select a rotation
in the data-processing
program
Action
Make sure your document
length doesn't exceed the
maximum number of lines
The printer may eject a blank
page when the page
orientation (portrait or
landscape) is changed
Change form length
configuration matches the
printer
Make sure the font ID used is
valid. Invalid font IDs are
ignored by the printer
Load the font that corresponds
to the font ID
If possible, try a known good
SIMM to
determine if SIMM is faulty.
Make sure the SIMM is loaded
properly
Select 90° or 270° orientation
program