Black Box PC124C Installation Manual page 93

LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
COMMAND 19: FF VALID LOCATION
Sets the printer in accordance with the RPQ installed in the control unit.
VALUE
*0
1
To use this function, the RPQ should be:
IBM 3268 RPQ SC9506
IBM 3287 RPQ SC3739
IBM 4214 OPT 19=1
Available only in LU3 (non-SCS) operation.
Example: &%Z19,1 makes FF valid anywhere it occurs
COMMAND 20: AUTOMATIC FUNCTION AT END OF JOB
Sets the printer in accordance with the RPQ installed in the control unit.
VALUE
*0
1
To use this function, the RPQ should be:
IBM 3268 RPQ SC9507
IBM 3287 RPQ SC3740
IBM 4214 OPT 20=2
Available only in LU3 (non-SCS) operation.
Do not press the form feed or line feed buttons on the front of the
printer. This will cause the host and printer to lose synchronization of
paper position. This command reduces the need to advance the paper.
Example: &%Z20,1 sets the printer to issue a FF automatically at the end of the
print buffer.
*Factory-default setting.
92
DESCRIPTION
FF is valid only at the first print position or at position MPP+1.
FF is valid anywhere it occurs.
DESCRIPTION
NL is automatically executed after the buffer is completed
(unless a FF, NL, or CR was last in the buffer).
FF is automatically executed after the print buffer is completed
(unless a FF was last in the buffer).
NOTES
NOTES