About This Manual - Black Box PC124C Installation Manual

LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS

2.3 About This Manual

The following five sections contained in this user's guide will give you the
information you need to get the most from your Laser Card.
• Chapter 1, Specifications.
• Chapter 2, Introduction, provides an overview of the Laser Card, including
printer emulations, supported Hewlett-Packard printers, and the adapter
cables required for either twinax or coax connectivity
• Chapter 3, Quick-Start Guide, gets your Laser Card up and running fast.
• Chapter 4, Installation, explains how to install the Laser Card in the HP 4000
LaserJet printer, perform a self-test, and how to connect to the twinax or coax
host.
• Chapters 5 and 9, Configuration, explain the use of the printer's front-panel
setup and twinax and coax configuration. Twinax configuration instructions
begin on page 32; coax configuration instructions begin on page 78 of this
manual.
• Chapters 6 and 10, Operation, provide a detailed overview of coax and twinax
host printing, emulations, font change commands, user-defined command
strings, and Command Pass-Thru™. Twinax operation instructions begin on
page 47; coax operation instructions begin on page 107 of this manual.
• Chapters 7 and 11, Advanced Features, detail the advanced features of the
Twinax and Coax models. Twinax instructions begin on page 65, while coax
information starts on page 112.
• Chapters 8 and 12, Troubleshooting, provide a detailed troubleshooting
guide. Twinax problem resolution instructions begin on page 69; coax
problem resolution instructions begin on page 115 of this manual.
• Appendix A is a font reference.
• Appendix B lists twinax and coax character sets.
• Appendix C describes color printing for twinax and coax.
• Appendix D lists resident scalable font numbers for twinax.
• Appendix E describes printing bar codes for twinax and coax.
10