Black Box PC124C Installation Manual page 120

Problem or Message
Printer won't change
fonts
Printer does not print in
specified orientation
(host-download command 8
or front panel setting)
CPT delimiter characters CPT delimiter characters Restore factory defaults.
were accidentally set to
00XX
LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
Probable Cause
Incorrect typestyle
number
Wrong optional fonts
loaded
Font SIMM damaged or
not seated into the printer SIMM to determine if SIMM is
properly
APO is active (ON) and
paper size is less than
1 ⁄ " x 11"
2
starting with 00 are invalid
Action
Make sure the font ID used is
valid. Invalid font IDs are
ignored by the printer.
Load the font that corresponds
to the font ID.
If possible, try a known-good
faulty. Make sure the SIMM is
loaded properly.
Turn APO off.
119