Quick-Start Guide; General; Installation - Black Box PC124C Installation Manual

LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS

3.1 General

Follow these simple steps to have your Laser Card up and running in minutes.
Before you begin, locate these parts:
• Laser Card
• Twinax or Coax Adapter Cable
• Reversible-Blade Screwdriver
The Laser Card is static-sensitive. Make sure you do not damage the
interface with static electricity. Where available, touch something metal
first and stand on an anti-static work surface when installing the Card.
After you have successfully completed a printer self-test (check your printer's
User's Guide), power OFF the printer, remove all cables, and then proceed with
the following installation instructions.

3.2 Installation

1. To install the Laser Card:
a. Locate an available EIO slot. Using the screwdriver, remove the bracket
covering it.
b. Insert the Laser Card and tighten the thumb screws.
c. Attach the twinax or coax adapter cable. Do NOT attach the host cable(s) to
the adapter yet.
d. Re-attach the power cord and other printer cables.
e. Power ON the printer.
f. For coax configuration, go to Section 3.2.1. For twinax configuration, go to
Section 3.2.2.
12

3. Quick-Start Guide

CAUTION