Changing Page-Rotation Settings - Black Box PC124C Installation Manual

6.11 Changing Page-Rotation Settings

Before changing page-rotation settings, first verify the current settings. In Office
Vision/400 and DisplayWrite/36, page-rotation settings can be viewed and
changed in the following manner:
1. Press F20 "Format options."
2. Press 1 "Document options" then ENTER.
3. Press 1 "Document format" then ENTER.
4. Press 4 "Page layout/paper options" then ENTER.
5. Press Page Down to scroll to the second screen.
6. Locate "Rotate Paper . . . option."
7. Move the cursor to the currently selected rotation setting and type in the
desired selection.
To permanently change the page-rotation setting for a data-processing report,
the print file must be changed. This should be done by an MIS staff member,
since a changed print file most likely affects many printers. The page-rotation
setting can be changed temporarily by overriding the print file. The print file must
be changed or overridden before the host creates the print job. An overridden
print file applies only to print jobs created on the host session that was active when
the print file was overridden.
To view the current print-file settings, type CHGPRTF followed by a space and
the name of the print file on the command line of the host. Press F4. Do not
change any settings unless authorized by the IS director.
To change the print file:
1. Type CHGPRTF on the command line of the host, and press Enter.
2. Type in the name of the print file to be changed.
3. Press F10 to display additional parameters.
4. Press Page Down to scroll to the fourth screen.
5. Locate "Degree of page rotation . . ." option.
LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
59