Black Box PC124C Installation Manual page 86

COMMAND 6: MAXIMUM PRINT POSITION
Selects current and default Maximum Print Position, the maximum number of
characters which can be printed on each line.
VALUE
000
001
to
255
*80
Normal values are 80, 132, or 198 characters. This default emulates the
front-panel selection on an HP printer.
MPP and the current position will not be changed by changes in CPI.
The infinite line length will place no limits on the number of characters
that can be sent to the printer on a single line.
Example: &%Z6,63 sets MPP to 63 characters
COMMAND 7: PRINT CASE
Selects default print case.
VALUE
0
*1
Example: &%Z7,0 sets default to mono case
*Factory-default setting.
LASER CARDS FOR HP 4000 TWINAX AND COAX PRINTERS
DESCRIPTION
Infinite line length
Set MPP in number of characters
Factory Default
DESCRIPTION
Mono case
Dual case
This default only affects LU3 printing.
NOTES
NOTE
85