Phone Options Menu - GE Concord 4 Series Installation Instructions Manual

Streamlining (pager 1: 01036, pager 2: 01046, pager 3:
01056, pager 4: 01066, pager 5: 01076)
This setting determines whether the panel includes (off) or excludes
(on) the account number when reporting to a pager.
Ptn Assignment (pager 1: 01037, pager 2: 01047, pager
3: 01057, pager 4: 01067, pager 5: 01077)
This setting determines the partition that reports to a pager. All parti-
tions can be assigned to report to a single pager.
Phone Number (01090)
Use this setting to enter the phone number of an off-site computer that
can be used to program the panel through the phone line. Phone numbers
can be 1 to 24 digits long, including pauses or * and # characters.
Note
Call-waiting services should be disabled to prevent interrupting panel commu-
nication to the downloader. To program a dialing prefix that disables call-wait-
ing, see the Call Wait Cancel setting under the menu
GLOBAL
.
To enter pauses, press C.
To enter *, press and hold 7 for about two seconds.
To enter #, press and hold 9 for about two seconds.
Phone Test (02000)
This setting determines if the user can, at any time, test the communica-
tion from the panel to the central station or a pager by entering 8 +
CODE + 2 (# + 8 + CODE + 2 from a touch-tone phone).
Note
For UL 1610 & 1635 listed installations, this feature must be set to on.
35
The following describes how to program the settings that appear under
PHONE OPTIONS—

Phone Options Menu

The menu lets you set up system phone access and communications that affect
PHONE OPTIONS
the whole system (global) or a specific partition.
The following describe how to program the Phone Options settings that appear under
WWW.DIYALARMFORUM.COM
Phones-Pager Phone 1-5 (Default = on)
To turn Streamlining off or on:
1. With the display showing
(current setting), press 1 (off) or 2 (on). The
ON
display flashes the entered setting.
2. Press # and the display shows the new setting.
Phones-Pager Phone 1-5 (Default = 1)
To set up Partition Assignments for pager
reporting:
1. With the display showing
(current setting), press 1-6 to select the
6
desired partitions. The display flashes the
entered settings.
2. Press # and the display stops flashing.
Phones-Downloader Phone (Default = none)
To program a downloader phone number:
1. With the display showing
rent number), enter the desired phone number.
The display flashes the entered number.
2. Press # and the display shows the new setting.
To delete a downloader phone number:
1. With the display showing
rent number), press D to erase the number. The
display shows
PHONE NUMBER_
Phone Options-Global (Default = on)
To turn the Phone Test setting off or on:
1. With the display showing
(current setting), press 1 (off) or 2 (on). The
display flashes the entered setting.
2. Press # and the display shows the new setting.
Concord 4 Series Systems
STREAMLINING OFF/
PARTITION ASSIGN 1-
.
DOWNLOADER PHONE
(cur-
PHONE NUMBER
(cur-
PHONE NUMBER
.
.
GLOBAL
PHONE TEST OFF/ON