Table of Contents
Advertisement
Installation
Setting Options
Press either of the Menu up/down buttons (under the lid to the bottom left of the display).
The display then shows ENTER PIN (Personal Identification Number) in the top line.
ENTER PIN
12:00 am
The default PIN is 0000, so press 0000 on the keypad (under the lid to the bottom left of
the display), or enter your PIN if you changed it (see page 24). This clears the top line
and shows * for each number entered.
****
12:00 am
This takes you to the first level of the menu at step 1. This is the INSTALLATION level.
The display looks like this:
1. INSTALL
Press an up or down menu button until you reach the OPTIONS menu below, and then
press OK (or press 7, instead of an up or down menu button, to go into the OPTIONS
menu):
7. OPTIONS
Press an up or down Menu button to select the desired sub-menu:
CHIME
1. CHIME ON
2. CHIME OFF (No chimes when doors/windows are opened)
SIREN
1. SIREN ON
2. SIREN OFF (Silent Alarm, but Console still dials out)
HOUSECODE
For X10/GE Module (Chosen by Menu up/down buttons)
LIGHTCODE
For flashing lights (Chosen by Menu up/down buttons)
ANSWER TYPE
1. ANSWER ON 2. ANSWER OFF 3. VOICE MAIL
Select the desired sub-menu item and then press OK. Press 1 or 2 in CHIME and SIREN
sub-menus, press OK. Select the desired Housecode letter, or desired Security Light
Code, using the up/down buttons, press OK. For ANSWER TYPE: 1 always answers, 2
never answers, use option 3 if you have a voice mail service, press OK. (See page 37).
Press Clear to back out of the menus. You are asked to confirm, 1. YES, 2 NO. Pressing 1
takes you back to the HOME CONTROL screen. Press 2 to stay in the INSTALL menu.
26
Installation
Setting Delays
Press either of the Menu up/down buttons (under the lid to the bottom left of the display).
The display then shows ENTER PIN (Personal Identification Number) in the top line.
ENTER PIN
12:00 am
The default PIN is 0000, so press 0000 on the keypad (under the lid to the bottom left of
the display), or enter your PIN if you changed it (see page 24). This clears the top line
and shows * for each number entered.
****
12:00 am
This takes you to the first level of the menu at step 1. This is the INSTALLATION level.
The display looks like this:
1. INSTALL
Press an up or down menu button until you reach the DELAYS menu below, and then
press OK (or press 8, instead of an up or down menu button, to go into the DELAYS
menu):
8. DELAYS
Press the up or down Menu button to select the desired sub-menu:
ENTRY DELAY
(Default 30 seconds)
EXIT DELAY
(Default 60 seconds)
DIAL DELAY
(Default 5 seconds)
ANSWER DELAY
(Default 30 seconds)
Select the desired sub-menu item and then press OK. Then enter the desired delay time
in seconds up to 99 (press 0 first for single digit times). Press OK.
Press Clear to back out of the menu. You are asked to confirm, 1. YES, 2 NO. Pressing 1
takes you back to the HOME CONTROL screen. Press 2 to stay in the INSTALL menu.
Pressing Clear while entering a number (for a delay time) just clears the numbers.
27
Advertisement
Table of Contents
