Download Print this page

GE Choice-Alert 45136 User Manual

Alarm siren
Hide thumbs

Advertisement

Quick Links

Wireless Alarm System
Alarm Siren
User's Manual
Low Batt On
Armed
ON/OFF
LEARN
Choice
Choice
ALERT
ALERT
Control all Sensors
& accessories from
one location
45136

Advertisement

loading

  Also See for GE Choice-Alert 45136

  Related Manuals for GE Choice-Alert 45136

  Summary of Contents for GE Choice-Alert 45136

  • Page 1 Wireless Alarm System Alarm Siren User’s Manual Low Batt On Armed ON/OFF LEARN Choice Choice ALERT ALERT Control all Sensors & accessories from one location 45136 ™ ™...
  • Page 2: Table Of Contents

    Important Safeguards Introduction Assigning a Alarm Siren to the system Installation Testing the Alarm Siren or your system Erasing Alarm Siren from system Low battery indicator Battery warnings FCC Warning Table of Contents...
  • Page 3 Before connecting or operating the Alarm Siren, please read these instructions carefully and save this manual for future reference. Congratulations The GE Choice Alert Wireless Alarm System is one ™ of the most affordable and expandable wireless alarm systems available. You’ll discover the system offers many features typically found in custom installed Alarm systems.
  • Page 4: Important Safeguards

    Important safeguards Pre Cautions 1. Do not attempt to disassemble the Alarm Siren, unless described in the user’s manual. There are no user serviceable parts. . Handle with Care – Avoid striking or shaking. Improper use or storage could damage the Alarm Siren.
  • Page 5: Assigning A Alarm Siren To The System

    Identify all the parts before proceeding. Low Batt On Low Batt On Armed Low Batt On The Alarm Siren will increase your system’s sound. Use in areas where the Control Center’s siren cannot be heard. Adding a Alarm Siren In order to link the Alarm Siren to the Control Center, you will need to have the Alarm Siren and Control Center near each other Step 1 - Remove cover on bottom of the Alarm...
  • Page 6: Installation

    Step 2 - Press and hold the Learn button inside the Alarm Siren. The ‘ON’ indicator on the front will begin to flash and it will sound continuious beeps. Step 3 - While continuing to press the Learn button on the Alarm Siren, press and hold the Mute button on the side of the Control Center for three seconds.
  • Page 7: Erasing Alarm Siren From System

    drywall mounting, as shown in diagram (2). Erasing the Alarm Siren from the system Step 1 - Remove the AC Adapter and battery from the Alarm Siren. Step 2 - With the AC Adapter and battery removed, press and hold the Learn button. Step 3 - While pressing the Learn button, re-install AC Adapter.
  • Page 8: Low Battery Indicator

    “Low battery” LED indicator will remain on. Model # Description 45129 Control Center 45136 Alarm Siren *maximum potential life based upon usage and location WARNING! Risk of personal injury - Prolonged exposure to alarm siren may cause permanent...
  • Page 10: Fcc Warning

    Any unauthorized changes or modifications to the equipment would void the user’s warranty and may conflict with both state and federal laws. The Choice Alert system complies with part 15 of the FCC rules. Operation is subject to the following conditions: 1) The Choice Alert system may not cause harmful interference.
  • Page 11 The product, if used properly, may reduce the risk of burglary, robbery, or other adverse events. However, JASCO is not an insurer, this product is neither insurance nor a guarantee that such an event will be prevented, and users should protect themselves with proper insurance.
  • Page 12 General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114. This Jasco product comes with a 1 year limited warranty. Visit 45136-1 www.jascoproducts.com for details. 01/09/08...