Identify Panel Components; Installing Antenna Shrouds - GE Concord 4 Series Installation Instructions Manual

Identify Panel
Components
Note
Skip this step for Concord 4
Hybrid and Concord 4 com-
mercial systems.
Concord 4 Series Systems
6. Recheck for level, insert the two lower screws, and tighten all four mounting screws.
Mounting
Before installing devices and making wiring connections, familiarize yourself with the main
panel components. Figure 3 shows the main component locations.
Backup Battery
Connections
Figure 3. Circuit Board Main Components

Installing Antenna Shrouds

Install a plastic antenna shroud (included with panel) over each antenna and snap them into the
holes on top of the enclosure (see Figure 4).
WWW.DIYALARMFORUM.COM
+ _
Holes
Figure 2. Mounting the Panel
Antennas
EEPROM
_
Microprocessor
+
Programming
Touchpad
Header
Terminal Strip
Figure 4. Installing Antenna Shrouds
Mounting
Holes
SnapCard
Header
10