Options Menu - GE Concord 4 Series Installation Instructions Manual

Partition Assign (030nnn5 where nnn=user
number 00-229)
This setting determines which partitions a user code can
access. A code can be assigned to all partitions if
desired, making it usable at any touchpad in any parti-
tion and able to jump to any selected partition.
Partition Master (0310 - 0315)
The Partition Master Code provides access to all system
operations and user programming for a single partition.
Note
You must be "in" the partition of the partition master code
you wish to change.
System Master (0320)
The System Master Code provides
access to all system operations and user
programming.
Note
In the partition where the indicating device
(Bell) power is located, only the System
Master Code may be enabled to disarm
that partition.
Downloading (041)
When this setting is on, the panel can communicate with Enter-
prise Downloader software for programming the system from
off-site.
Note
For this feature to work, the panel must be connected to a phone line
and be programmed with REMOTE ACCESS on, with a Downloader
phone number, and with a Downloader code.
65
To change the System Master Code:
1. With the display showing
shows
SYSTEM MASTER CODE
and
2. Press #
3. Enter a new 4-digit code. The display flashes the entered code. Press # and dis-
play shows the new code.

Options Menu

The menu lets you set up the system for downloading and silent arming. You can also
OPTIONS
adjust alphanumeric touchpad display brightness from this menu.
WWW.DIYALARMFORUM.COM
User Codes-Reg. User Codes-User NNN (Default = Ptn 1)
To assign Partitions to a user code:
1. With the display showing
shows
REGULAR USER CODES
and
2. Press # the display shows
number).
3. Press A or B to select the desired user number, then press #. The
display shows
USER nnn - nnnn
4. Press A or B until the display shows
setting).
5. Enter the desired partitions (1-6). The display flashes the
entered numbers. Press # and the numbers stop flashing.
User Codes-Partition Master Code (Default = none)
To change the Partition Master Code:
1. With the display showing
until the display shows
and
2. Press # the display shows
3. Enter a new 4-digit code. The display flashes the entered code.
Press # and the display shows the new code.
User Codes-System Master Code (Default = 1234)
, press # then A or B until the display
USER CODES
.
the display shows
SYSTEM MASTER nnnn
To turn Downloading off or on:
1. Press A or B until the display shows
2. Press #, then A or B until the display shows
LOADING OFF/ON
3. 1 (off) or 2 (on). The display flashes the entered
Press
selection. Press
, press # and the display
USER CODES
.
(first available user
USER nnn
.
PARTITION ASSIGN
, press # then A or B
USER CODES
.
PARTITION MASTER CODE
(current code).
PARTITION nnnn
(current code).
Options (Default = on)
OPTIONS
(current setting).
# and the display shows the new setting.
Concord 4 Series Systems
(current
.
DOWN-