Advertisement

Quick Links

Concord/Express

1. Set your alarm when leaving home (motion detectors ON):

a. Close doors and windows until no zones show open.
b. Press AWAY (3) + User Code.
c. Red "ARMED" light will turn on. Exit the premises within 60 seconds.

2. Disarm the system (or cancel an accidental alarm):

a. Keypad will beep. You have 30 seconds to disarm.
b. Press OFF (1) + User Code.

3. Set the alarm when at home with a delay (motion detectors OFF):

a. Close doors and windows until no zones show open.
b. Press STAY (2) + User Code.
c. Red "ARMED" light will turn on.

4. Disarm before opening doors:

a. Press OFF (1) + User Code.

5. Set the alarm when at home with no delay (motion detectors OFF):

a. Close doors and windows until no zones show open.
b. Press STAY (2) + User Code + Press NO DELAY (4) button.
c. Red "ARMED" light will turn on.

6. If an alarm has been triggered:

a. Before proceeding, verify that the alarm was triggered accidentally. If you
aren't sure, wait for the phone call from central station.
b. If accidental, press OFF (1) + User Code. This will silence the alarm and cancel
dispatch.
Continued on Back
quick reference guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Concord and is the answer not in the manual?

Questions and answers

Summary of Contents for GE Concord

  • Page 1 Concord/Express quick reference guide 1. Set your alarm when leaving home (motion detectors ON): a. Close doors and windows until no zones show open. b. Press AWAY (3) + User Code. c. Red “ARMED” light will turn on. Exit the premises within 60 seconds.
  • Page 2 7. Turn the door chime on or off: a. Press CHIME (7) + 1. b. You will hear three beeps if enabled, one beep if disabled. c. 8. Check system status: d. Press * for short status e. Press * * for long status To change your four-digit Master Code: g.

This manual is also suitable for:

Express

Table of Contents