Partition Security (0004) - GE Concord 4 Series Installation Instructions Manual

Installer Code (0001)
The 4-digit installer code is used for entering program mode and changing
system settings. If a dealer code is programmed, only those settings not
associated with phone numbers and the Downloader Code can be changed.
Note
The Installer Code cannot be deleted or cleared from panel memory. To change
the Installer Code to its default setting, enter 4321.
Dealer Code (0002)
The 4-digit dealer code is used to prevent unauthorized per-
sons from changing the programmed central station phone
numbers and Downloader Code. When this feature is enabled,
central station phone numbers and Downloader Code cannot
be changed (unless you enter the program mode by using the
dealer code). All other system settings are still accessible by
entering the program mode with the installer code.
Note
The Dealer Code cannot be deleted by clearing panel memory.
Access Code Lock (0003)
This setting determines whether or not the panel will include Access
Codes when sending user information to the automation module. When
this option is on, it means the Access Codes are not sent.

Partition Security (0004)

Controls whether an access code is required for partition jumping. When turned
on, users must jump partitions with an access code by pressing 8 + CODE + 6 +
PTN. When turned off, users can jump partitions without an access code by
pressing 7 + 4 + PTN n (n = 1-6).
Note
Regardless of the setting, an access code can always be used to jump partitions.
27
WWW.DIYALARMFORUM.COM
Security-Global (Default = 4321)
To program a Installer Code:
1. With the display showing
(current code), enter the desired 4-digit
nnnn
code. The display flashes the entered code.
2. Press # and the display shows the new code.
Security-Global (Default = none)
To program a Dealer Code:
1. With the display showing
desired 4-digit code. The display flashes the entered
code.
2. Press # and the display shows the new code.
To delete a Dealer Code:
1. With the display showing
code), press D. The display shows
To turn Access Code Lock off or on:
1. With the display showing
, press 1 (off) or 2 (on). The display
ON/OFF
flashes the entered setting.
2. Press # and the display shows the new setting.
To turn Partition Security off or on:
1. With the display showing
(current setting), press 1 (off) or 2 (on).
The display flashes the entered setting.
2. Press # and the display shows the new
setting.
INSTALLER CODE
, enter the
DEALER CODE ****
(current
DEALER CODE nnnn
DEALER CODE ****
Security-Global (Default = on)
ACCESS CODE LOCK
Security-Global (Default = on)
PTN SECURITY
Concord 4 Series Systems
.