Attach Schedules To Events Menu - GE Concord 4 Series Installation Instructions Manual

Set Up Schedules (05XXY, where
XX=schedule 00-15 and Y=start [0]/stop[1]
Monday thru Sunday [2-8])
This menu lets you set up start/stop times for each day of
the week.
Schedules used by one partition cannot be viewed or
changed from a different partition.
Note
If you are programming schedules for your customer, be
sure to record the settings in the User's Manual.
Latchkey Reports (Opening: 060nn,
Closing: 061nn, where nn=Schedule
number [0 to 15])
This setting lets you attach the Latchkey
Opening report feature and the Latchkey
Closing report feature to time schedules.
67
1.
2.
3.
4.
5.
6.
7.
8.
9.

Attach Schedules to Events Menu

The
ATTACH SCHEDULES TO EVENTS
schedules:
• Latchkey Opening—sends a report if system is disarmed within the attached time schedule.
• Latchkey Closing—sends a report if system is armed within the attached time schedule.
• Exception Opening—sends a report if system is not disarmed within the attached time
schedule.
• Exception Closing—sends a report if system is not armed within the attached time sched-
ule.
• Lights (1–9) activate X10 controlled lights by the attached time schedule.
• Outputs (1–6) allow users to attach onboard (1–2) and SnapCard outputs to a schedule.
• Arming—Allows the user to arm the panel at the schedule start time.
To Attach a Schedule to Latchkey Opening or Latchkey Closing:
1. Press A or B until the display shows
2. Press # then A or B until the display shows
KEY CLOSING
3. Press # and the display shows
want a different schedule, press A or B until the desired schedule appears.
4. Press 1 (off) or 2 (on). The display flashes the entered selection. Press # and
the display shows the new setting for the selected schedule.
WWW.DIYALARMFORUM.COM
To set up a Time Schedule:
Press A or B until the display shows
Press # and the display shows
ent schedule number, press A or B until the desired schedule num-
ber appears.
Press # and the display shows
Enter the desired starting time (00:00–23:59). The display flashes
the entered time. Press # and the display shows
(new setting).
Press B and the display shows
Enter the desired stop time (00:00–23:59). The display flashes the
entered time. Press # and the display shows
setting).
Press B and the display shows
To select a different day, continue pressing B until the desired day
appears.
Press 1 (off) or 2 (on). The display flashes the entered selection.
Press # and the display shows the new setting for the selected day.
Repeat steps 7 and 8 until all desired settings for each day are set.
menu lets you link the following system events to time
Attach Schedules to Events (Default = off)
.
SCHEDULE 00 OFF/ON
(Default = 00:00)
SET UP SCHEDULES
. If you want a differ-
SCHEDULE 00
(current setting).
START TIME hh:mm
START TIME hh:mm
(current setting).
STOP TIME hh:mm
STOP TIME hh:mm
(current setting).
MONDAY OFF/ON
ATTACH SCHEDULES TO EVENTS
LATCHKEY OPENING OR LATCH-
(current setting). If you
Concord 4 Series Systems
.
(new
.