Multi-Partition Arm/Disarm (0005) - GE Concord 4 Series Installation Instructions Manual

Multi-Partition Arm/Disarm (0005)

Controls which partitions can be armed/disarmed simultaneously when using a
touchpad and access code assigned to those partitions. When enabled, users can
arm/disarm selected partitions using an authorized access code. When disabled,
multiple partitions cannot be armed/disarmed simultaneously.
• At least two partitions must be selected for this feature to work.
• Touchpads must be assigned to at least one of the selected partitions of this
menu for this feature to work.
• Access codes must be assigned to all selected partitions of this menu for
this feature to work. If the partition assignment for a specific access code
does not match the partitions selected in this menu, only those partitions
common to both menu settings can be armed/disarmed simultaneously
with that code.
• A partition cannot be armed/disarmed if it is being controlled by another
source at that time.
• All arming modifiers (No Delay, Latchkey, etc.) except Silent affect all
partitions being armed. Only the arming partition can be armed silently.
• When arming multiple partitions, any conditions that prevent arming
(open sensor, trouble, active alarm, etc.) are identified on touchpad dis-
plays with the affected partition number flashing. The normal protest/auto
force arm sequence follows, or pressing * cancels the arming request.
• When disarming multiple partitions, any partitions in alarm have the
affected partition number flashing on touchpad displays. Pressing # can-
cels all alarms in the selected partitions. Alarm memory information is
then displayed for all canceled alarms.
Concord 4 Series Systems
WWW.DIYALARMFORUM.COM
Security-Global (Default = none)
To enable Multi-Partition Arm/Disarm:
1. With the display showing
, press 1-6 to enter the
ARM/DISARM _
desired partitions (at least two). The dis-
play flashes the entered partitions.
2. Press # and the display stops flashing.
To disable Multi-Partition Arm/Disarm:
1. With the display showing
ARM/DISARM n n n n n n n
displayed partitions by entering the
appropriate partition number. The parti-
tion numbers disappear from the display.
2. Press #.
MULTI-PTN
MULTI-PTN
, select all of the
28