GE Concord 4 Series Installation Instructions Manual page 39

High Level Rpts (pager 1: 01031, pager 2: 01041, pager 3:
01051, pager 4: 01061, pager 5: 01071)
This setting determines whether the following alarm conditions report to a
pager:
• Fire, Police, Auxiliary, and Duress alarms
• No Activity
• Receiver Failure (or jam)
• Tamper conditions, including Zone Tampers and System Tamper (40
incorrect key presses or touchpad supervisory)
• Entering or exiting Sensor Test mode
• Phone Test
Low Level Rpts (pager 1: 01032, pager 2: 01042, pager 3:
01052, pager 4: 01062, pager 5: 01072)
This setting determines whether the following non-alarm conditions report
to a pager:
• Force Armed
• Hardwire Zone Trouble (open or short)
• Supervisory (wireless devices)
• Low Battery (wireless devices)
• Phone Test
• Other non-alarm related conditions
Exception Rpts (pager 1: 01033, pager 2: 01043, pager 3:
01053, pager 4: 01063, pager 5: 01073)
This setting determines whether the panel reports to a pager if the sys-
tem is not armed or disarmed at the specified schedule times, if open/
close reports are turned on.
Open/Close Rpts (pager 1: 01034, pager 2: 01044, pager 3:
01054, pager 4: 01064, pager 5: 01074)
This setting determines whether opening and closing reports are sent to a
pager. When turned on, the panel sends a closing report when the system
is armed and an opening report when the system is disarmed.
Note
To use this feature, the opening reports and closing reports settings under the
menu must be turned on for that partition.
REPORTING
Latchkey Reports (pager 1: 01035, pager 2: 01045, pager
3: 01055, pager 4: 01065, pager 5: 01075)
This setting determines whether the panel reports to a pager when the
system is armed or disarmed, according to latchkey time scheduling.
Concord 4 Series Systems
WWW.DIYALARMFORUM.COM
Phones-Pager Phone 1-5 (Default = on)
To turn High-Level Reports off or on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press # and the display shows the new set-
ting.
Phones-Pager Phone 1-5 (Default = off)
To turn Low-Level Reports off or on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press # and the display shows the new set-
ting.
Phones-Pager Phone 1-5 (Default = off)
To turn Exception Reports off or on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
Phones-Pager Phone 1-5 (Default = off)
To turn Opening/Closing Reports off or on:
1. With the display showing
(current setting), press
OFF/ON
(on). The display flashes the entered setting.
2. # and the display shows the new setting.
Press
Phones-Pager Phone 1-5 (Default = on)
To turn Latchkey reports off or on:
1. With the display showing
(current setting), press 1 (off) or 2
OFF/ON
(on). The display flashes the entered setting.
2. Press # and the display shows the new setting.
HIGH LEVEL RPTS
LOW LEVEL RPTS
EXCEPTION RPTS
OPEN/CLOSE RPTS
1 (off) or 2
LATCHKEY RPTS
34