Hemstitching (3) (Drawn Work (2)) - Brother computerized sewing and embroidery machine Operation Manual

a
Pull out several threads from the fabric to
leave a 3 mm (approx. 1/8 inch) area open.
Memo
For best result, use loosely woven fabrics.
LSN
b
Press
Memo
For details on the stitch patterns, refer to the "STITCH
SETTING CHART" at the end of this manual.
c
With the surface of the fabric facing up, sew
along the right edge of the open area.
d
Press
stitch.
e
Sew along the left edge of the open area so
that the stitching looks symmetrical.
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
, and then attach presser foot "N".
N
to create a mirror image of the
N
Tel: 03-91025766/ 5767

■ Hemstitching (3) (Drawn Work (2))

Memo
Drawn work can also be sewn using the wing needle
(sold separately).
a
Pull out several threads from both sides of a 4
mm (approx. 3/16 inch) area left unopened,
as shown in the illustration.
b
a Pulled out thread
b Pulled out area
c Approximately 4 mm (approx. 3/16 inch) remaining
b
Press .
Memo
For details on the stitch patterns, refer to the "STITCH
SETTING CHART" at the end of this manual.
c
Attach presser foot "N", and then sew along
the center of the unopened area.
Fax: 03-91025768 H/P: 012-6552245
SEWING THE STITCHES
a
c
N
3
73