SEWING THE STITCHES
h
Close the zipper, turn the fabric over so that
the surface faces up, and then baste the other
side of the zipper to the fabric.
a Front of garment (wrong side of fabric)
b Back of garment (surface of fabric)
c Basting
d Front of garment (surface of fabric)
LSN
i
Remove the presser foot, and then attach the
pin on the left side of the zipper foot to the
presser foot holder.
b
a Right side
b Left side
c Needle drop point
j
Set the fabric so that the left edge of the
presser foot touches the edge of the zipper
teeth.
k
Sew reverse stitches at the top of the zipper,
then continue sewing.
l
Stop sewing about 50 mm (approx.
2 inches) from the edge of the fabric, leave
the needle in the fabric, and remove the
basting stitches.
m
Open the zipper and sew the rest of the seam.
b
a Basting
b Reverse stitching
c 7 to 10 mm (approx. 1/4 to 3/8 inch)
d 50 mm (approx. 2 inches)
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
86
c
a
b
a
c
a
c
d
Tel: 03-91025766/ 5767
d
Fax: 03-91025768
H/P: 012-6552245
Need help?
Do you have a question about the computerized sewing and embroidery machine and is the answer not in the manual?
Questions and answers