Lcd Screen; Display Precautions - Brother computerized sewing and embroidery machine Operation Manual

Computerized sewing and embroidery machine
Hide thumbs Also See for computerized sewing and embroidery machine:
Table of Contents

Advertisement

LCD SCREEN

■ Display Precautions

• Only touch the display with your finger or the touch pen included with the machine. Do not use a
mechanical pencil, screwdriver or any other hard or sharp objects. In addition, do not press the display with
extreme pressure, otherwise damage to the display may result.
• All or part of the display may sometimes become darker or lighter due to fluctuations in the surrounding
temperature or other changes in the environment. This is not a sign of a malfunction. If the display is difficult
to read, adjust its brightness (see page 21).
• The display may be dark immediately after the machine is turned on. This is a normal characteristic of the
backlight and is not a sign of a malfunction. After approximately 10 minutes, the display should reach its
normal level of brightness.
• If you are not directly facing the display, the colors may be distorted or the screen may be difficult to read.
This is a normal characteristic of the display and is not a malfunction. Be sure to sit in front of the display
LSN
while using it.
When the machine is turned on, the opening screen appears. The machine can be set so that the opening screen is
not displayed (see page 21).
Lightly press the display with your finger. Depending on the setting, either "1-01 Straight stitch (Left)" or "1-03
Straight stitch (Middle)" is automatically selected (see page 20).
Memo
It may take some time until the opening screen appears. This is not a sign of a malfunction.
a
b
c
d
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
e
Tel: 03-91025766/ 5767
Fax: 03-91025768
a
Shows whether the machine is set for a single needle
or twin needle, and the needle position when the
machine is stopped. The desired needle position can
be set (see page 20).
For a single needle
Single needle/down
position
For a twin needle
Twin needle/down
position
b
Presser foot code
Attach the indicated presser foot before sewing.
c
Shows the number for the selected stitch (only for
utility stitches).
d
Shows a preview of the selected stitch.
e
Shows the current page number and the total number
of pages available.
H/P: 012-6552245

LCD SCREEN

1
Single needle/up
position
Twin needle/up
position
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nv1500dNv1500

Table of Contents