Moving A Point - Brother computerized sewing and embroidery machine Operation Manual

ENTERING STITCH DATA
h
Press
LSN
Memo
• If you have entered points that are too close
together, the fabric may not feed properly. Edit the
stitch data to leave a larger space between points.
• If the stitch design is to be repeated and linked,
make sure that linking stitches are added so that the
stitch designs will not overlap.
a
Linking stitches
i
If necessary, adjust any settings, such as the
stitch width and stitch length.
* Press
* Press
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
168
.
a
to return to the stitch selection screen.
to edit the custom stitch being created.
Tel: 03-91025766/ 5767

■ Moving a Point

a
Press
that you want to move.
* To move
* To move
* You can also move
b
Use
Fax: 03-91025768 H/P: 012-6552245
or to move to the point
to the first point, press
to the last point, press .
by using the touch pen.
to move the point.
.