Overcasting; Overcasting Using Presser Foot "G - Brother computerized sewing and embroidery machine Operation Manual

SEWING THE STITCHES

Overcasting

Sew overcasting at the beginning and end of seams for skirts or pants, and at the beginning and end of all cuttings.
Depending on the selected stitch, use presser foot "G" or "J" or the side cutter attachment.

■ Overcasting Using Presser Foot "G"

Stitch
Stitch Name
Key
Overcasting stitch
Overcasting stitch
LSN
Overcasting stitch
a
Select a stitch, and then attach presser foot
"G".
b
Lower the presser foot so that the presser foot
guide is flush against the edge of the fabric.
c
Sew along the presser foot guide.
a Presser foot guide
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
58
Presser
Applications
Foot
Reinforcing of light and medium
weight fabrics
Reinforcing of heavyweight
fabric
Reinforcing of medium,
heavyweight and easily friable
fabrics or decorative stitching.
a
Tel: 03-91025766/ 5767 Fax: 03-91025768
Stitch Width Stitch Length*
[mm (inch)]
Auto Manual Auto
3.5 2.5 - 5.0 2.0
(1/8) (3/32 - 3/16) (1/16)
5.0 2.5 - 5.0 2.5
(3/16) (3/32 - 3/16) (3/32)
5.0 3.5 - 5.0 2.5
(3/16) (1/8 - 3/16) (3/32)
CAUTION
• After the stitch width is adjusted, turn the handwheel
toward you by hand and check that the needle does
not touch the presser foot. If the needle hits the
presser foot, the needle may break and cause injury.
a
a The needle should not touch
• If the presser foot is raised to its highest level, the
needle may strike the presser foot.
H/P: 012-6552245
Twin
[mm (inch)]
Needle
Manual
1.0 - 4.0
NO
(1/16 - 3/16)
1.0 - 4.0
NO
(1/16 - 3/16)
1.0 - 4.0
NO
(1/16 - 3/16)
G