Heirloom Stitching; Hemstitching (1) (Daisy Stitch); Hemstitching (2) (Drawn Work (1)) - Brother computerized sewing and embroidery machine Operation Manual

SEWING THE STITCHES

Heirloom Stitching

By sewing with the wing needle sold separately, the
needle holes are enlarged, creating a lace-like
decorative stitch.
This stitching is used to decorate tablecloths, hems, and
shirt fronts.
■

Hemstitching (1) (Daisy Stitch)

LSN
Note
For best results, use lightweight to medium weight
homespun fabrics with a slight stretch.
a
Insert the wing needle (130/705H, size 100/
16).
Note
The needle threader cannot be used. Manually pass
the thread through the eye of the needle from the front.
If the needle threader is used, damage to the machine
may result.
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
72
Tel: 03-91025766/ 5767 Fax: 03-91025768
b
Select a stitch, attach presser foot "N", and
then start sewing.
* Select a stitch between 3-01 and 3-22.
Drawn Work (1
CAUTION
• The "Automatic Threading" button cannot be used.
Thread the wing needle by hand, from front to back.
Using the "Automatic Threading" button may result
in damage to the machine.
• A more attractive finish can be obtained if you use a
"130/705H Wing" needle when sewing these
patterns. If using a wing needle and the stitch width
has been set manually, check that the needle will not
touch the presser foot by carefully rotating the
handwheel before starting sewing.
Memo
For details on the stitch patterns, refer to the "STITCH
SETTING CHART" at the end of this manual.

■ Hemstitching (2) (Drawn Work (1))

H/P: 012-6552245