SELECTING A UTILITY STITCH
• The next time that the same straight stitch is
selected, the stitch length is set to 2.0 mm.
• All stitch settings (stitch width (zigzag width), stitch
length, thread tension, automatic thread cutting, and
automatic reverse/reinforcement stitching) are
saved, not just the setting that was changed. When
the same stitch pattern is selected, the last settings
saved are displayed even if the machine was turned
off. If the settings are changed again and
pressed, or if
to its default, the new settings are not saved unless
Using the Sewing Type Selection Key
according to its desired use. When you are not sure
which stitch to select for your application or when you
need information on how certain stitches are used,
, select the appropriate stitch for your
project, and then follow the instructions to sew the
We recommend that beginners use this method to
→ The advice screen is displayed.
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
is pressed to reset the setting
is pressed another time.
, a utility stitch can also be selected
Displaying information about
Tel: 03-91025766/ 5767
→ The upper part of the screen displays a selection of
overcasting stitches with explanations.
Read the descriptions, and then select the
→ The screen displays directions for sewing the
Follow the directions to sew the stitch.
When you have finished sewing, press
to scroll the page.
to display the next page.