Changing The Pattern Size; Changing The Pattern Length (7 Mm Satin Stitch Patterns Only); Creating A Vertical Mirror Image; Creating A Horizontal Mirror Image - Brother computerized sewing and embroidery machine Operation Manual

Changing the Pattern Size

After selecting a stitch pattern, press
desired size is selected.
Memo
• Stitch patterns entered after the pattern size
was changed are added at the selected size
until it is changed again.
LSN
• You cannot change the size of stitch patterns
once they have been combined.
Actual size
L
S
Changing the Pattern Length
(7 mm Satin Stitch Patterns Only)
If 7 mm satin stitch patterns are selected, the pattern
length can be changed without changing the zigzag
width or stitch length. After selecting a stitch pattern,
press to select one of the five settings available.
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
until the
Tel: 03-91025766/ 5767 Fax: 03-91025768
EDITING STITCH PATTERNS

Creating a Vertical Mirror Image

After selecting a stitch pattern, press
pattern vertically.

Creating a Horizontal Mirror Image

After selecting a stitch pattern, press
pattern horizontally.
H/P: 012-6552245
to flip the
to flip the
4
95