Adjusting Stitch Settings; Adjusting The Stitch Width; Adjusting The Stitch Length - Brother computerized sewing and embroidery machine Operation Manual

ADJUSTING STITCH SETTINGS

ADJUSTING STITCH SETTINGS

When a stitch is selected, the most appropriate stitch width, stitch length, and upper thread tension are
automatically set. However, if needed, you can change any of the settings as described in this section.
Note
• Settings for some stitches cannot be changed (See the "STITCH SETTING CHART" at the end of this manual).
• If a stitch setting is changed, but not saved, the stitch setting returns to its default when the machine is turned off or a
different stitch is selected.

Adjusting the Stitch Width

The stitch width (zigzag width) can be adjusted to make
the stitch wider or narrower.
LSN
Memo
If the foot controller is connected, the sewing speed
controller can be used to adjust the zigzag width (see
page 64).
Each press of
Each press of
Press to return the setting to its default.
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
42
makes the zigzag stitch narrower.
makes the zigzag stitch wider.
Tel: 03-91025766/ 5767

Adjusting the Stitch Length

The stitch length can be adjusted to make the stitch
coarser or finer.
Each press of
Each press of
Press to return the setting to its default.
• If the stitches get bunched together, lengthen the
stitch length and continue sewing. Do not continue
sewing without lengthening the stitch length.
Otherwise, the needle may break and cause injury.
Fax: 03-91025768 H/P: 012-6552245
makes the stitch finer (shorter).
makes the stitch coarser (longer).
CAUTION