Using A Frame Pattern To Make An Appliqué (2) - Brother computerized sewing and embroidery machine Operation Manual

Using a Frame Pattern to Make an
Appliqué (2)
This is a second method for making appliqués using
embroidery patterns. With this method, there is no need
to change the fabric in the embroidery frame. To make
the appliqué, embroider one pattern with a straight
stitch and the other pattern with a satin stitch.
a
Select a straight stitch frame pattern, and then
embroider the pattern onto the base fabric.
LSN
b
Place the appliqué fabric over the pattern
embroidered in step
appliqué fabric completely covers the
stitching.
c
Embroider the same pattern on the appliqué
fabric.
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
a
. Make sure that the
Tel: 03-91025766/ 5767 Fax: 03-91025768
EMBROIDERY APPLICATIONS
d
Remove the embroidery frame from the
machine, and then cut around the outside of
the stitching.
Note
Leave the fabric in the embroidery frame when cutting
off the excess appliqué fabric. In addition, do not apply
extreme pressure to the framed fabric, otherwise the
fabric could become loose.
e
Select the satin stitch frame pattern of the
same shape as the appliqué.
Note
Do not change the size or embroidering position of the
pattern.
f
Attach the embroidery frame removed in step
d
, and then embroider the pattern.
H/P: 012-6552245
5
147