Table of Contents
Advertisement
Heirloom
■ Hemstitching (1) (Daisy Stitch)
Use for sewing tablecloths, decorative hems, and
decorative stitching on shirt fronts.
Memo
Use a light to medium weight homespun fabric
with a little stiffness.
a
Insert a type 130/705H, size 100/16 Wing
needle.
CAUTION
• The "Automatic Threading" button cannot be
used. Thread the wing needle by hand, from
front to back. Refer to "Threading Manually"
on page 31. Using the "Automatic Threading"
button may result in damage to the machine.
• A more attractive finish can be obtained if you
use a "130/705H Wing" needle when sewing
these patterns. If using a wing needle and the
stitch width has been set manually, check that
the needle will not touch the presser foot by
carefully rotating the handwheel before
starting sewing.
b
Select a stitch and attach presser foot "N".
*
Select any stitch between 3-01 and 3-25.
Memo
• For details on each stitch, refer to the
"STITCH SETTING CHART" at the end of
this manual.
c
Start sewing.
Example: Illustration of finished product
■ Hemstitching (2) (Drawn Work (1))
a
Pull out several threads from one area on a
piece of fabric to open the area.
*
Pull out 5 or 6 threads to leave a 3 mm
(approx. 1/8 inch) area open.
Memo
Loosely woven fabrics work best for this.
b
Select
.
Memo
For details on each stitch, refer to the
"STITCH SETTING CHART" at the end of this
manual.
c
Attach presser foot "N". With the right side
of the fabric facing up, sew one edge of the
open area.
SEWING THE STITCHES
N
3
95
Advertisement
Chapters
Table of Contents
