If The Thread Breaks During Sewing - Brother computerized sewing and embroidery machine Operation Manual

f
Press the "Presser Foot Lifter" button to lower
the presser foot.
g
To return to the point in the pattern where
sewing was stopped, follow steps
f
in the next section.
Memo
For best results, return to a point 2 or 3 stitches before
sewing stopped.

If the Thread Breaks During Sewing

a
Press the "Start/Stop" button to stop the
LSN
machine.
b
If the upper thread broke, rethread the
machine. If the bobbin thread broke, follow
the instructions in steps
the previous section to reinstall the bobbin.
c
Press
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
c
a
through
.
Tel: 03-91025766/ 5767
d
Press
needle back 2 or 3 stitches before the point
where the thread broke.
through
* If you cannot return to the point where the thread
broke, press
the beginning of that color. Then, press
the point where the thread broke.
f
from
a The number of stitches that have already been sewn.
e
Press
f
Press the "Start/Stop" button to continue
embroidering.
Fax: 03-91025768
SEWING AN EMBROIDERING PATTERN
, or to move the
to select a color and return to
or to move forward slightly before
a
.
H/P: 012-6552245
,
5
135