Changing The Needle; Checking The Needle - Brother computerized sewing and embroidery machine Operation Manual

CHANGING THE NEEDLE

CHANGING THE NEEDLE

• Always press
Stop" button or another operation button is pressed accidentally, the machine will start and injury may result.
• Use only sewing machine needles made for home use. Other needles may bend or break and may cause injury.
• Never sew with a bent needle. A bent needle will easily break and may cause injury.

■ Checking the Needle

Place the flat side of the needle on a flat surface
(such as the needle plate or a piece of glass) and
LSN
check that the gap between the needle and the flat
surface is even.
Note
Never use bent or blunt needles.
a
Even gap
b
Flat surface (bobbin cover, glass, etc.)
a
Press the "Needle Position" button to raise
the needle.
LINGS SERVICE NETWORK (M) SDN BHD, NO 24 Jalan Damai Perdana 1/8C, Bandar Damai Perdana, 56000 Cheras, W.P. Kuala Lumpur
34
CAUTION
in the operation panel before changing the needle. If
a
b
Tel: 03-91025766/ 5767 Fax: 03-91025768
b
Press .
→ The screen changes, and all keys and operation
buttons are locked.
H/P: 012-6552245
is not pressed and the "Start/