Modes Of Operation; Standard Mode; Reverse Mode; Condominium Mode - Centurion Vector2 User Manual

3.1.2. Modes of Operation

To operate the gate to open fully, the VECTOR2 has a number of
operating modes to choose from depending on the application. Only one
mode can be selected at any given time.
Standard Mode (with selectable Autoclose feature)

Reversing Mode (with selectable Autoclose feature)

Condominium Mode (compulsory Autoclose)

Standard Mode, which allows full control of the gate, is most
commonly used in domestic applications.
An alternative is Reversing Mode which provides a greater level of
security as described below. Finally, Condominium Mode is designed
for multi-user, light-industrial applications such as townhouses, housing
estates and office parks.
 3.1.2.1. Standard Mode
Standard Mode is the most commonly used mode for domestic
applications as it allows full control of the gate. Press the button of
the remote control or the gate / door release pushbutton on the
intercom for approximately one second to get the gate in motion. If
you press the button again while the gate is moving, the gate will
stop. Press the button for a third time and the gate will reverse.
Autoclose (page 8) and PIRAC (Beam Autoclose)
(page 11) can be used with Standard Mode. An infrared
safety beam needs to be installed across the gate
entrance and connected to the Closing Safety Beam input
on the VECTOR2 to use this function, in order to prevent
the gate from closing on people, pets or vehicles.
(Page 16)
 3.1.2.2. Reversing Mode
Reversing Mode offers slightly more security than Standard Mode
as it allows you to close your gate quickly by pressing, for
instance, your remote control just as you drive through the gate
to prevent children or pets running out - or anybody getting in
behind you.
When pressing the button of the remote control or the gate/door
release pushbutton on the intercom, your gate will be set in
motion. If you press the button again, the gate will move in the
opposite direction.
So, if the gate is opening and you press the button, the
gate will stop and immediately start to close (and vice
versa)
 3.1.2.3. Condominium Mode
This mode is ideal for increased safety and security in multi-user
applications such as townhouses, estates, factories or office
parks.
page 7
Features
and
functions