Features And Functions; Introduction; Gate Operation; Full Gate Opening - Centurion Vector2 User Manual

Introduction

The VECTOR2 linear arm operator is controlled with the VECTOR2
controller (PCA10501Vx). The controller synchronizes the functions of the
gate operator.
The VECTOR2 controller is particularly user-friendly as it is fitted with a
Features
LCD (Liquid Crystal Display) that provides useful information on the
and
status of the system.
functions
Under normal running conditions the 'User Display' is shown on the LCD
display. (A 'Debug Display' can be invoked and is typically used by the
installer where abnormal operational problems occur)

3.1. Gate operation

3.1.1. Full gate opening

The CENTURION rolling code
(Keeloq
controls that operate with the
onboard receivers of the
VECTOR2 swing gate operator
are used to operate the gate.
However, most automatic gate
installations are also fitted with
an intercom, which provides for
communication between the
house/building and the gate.
The handset is usually fitted
with a gate/door release
pushbutton which, when
pressed, will operate the gate.

3. Features and functions

TM
encryption) remote
page 6
FIGURE 4
FIGURE 5