Features And Functions; Introduction; Gate Operation; Full Gate Opening - Centurion D2 Turbo User Manual

3. Features and functions

Introduction

The D2 Turbo sliding gate operator's advanced functions are controlled
by an intelligent micro-controller based electronic controller.

3.1. Gate operation

3.1.1. Full Gate Opening

The NOVA remote controls (with
TM
Keeloq encryption) supplied
with the D2 Turbo are used to
operate the gate.
However, most automatic gate
installations are also fitted with
an intercom, which provides for
communication between the
house or building and the gate.
The handset is usually fitted
with a gate pushbutton, which
when pressed, sends a signal to
the D2 Turbo controller to
operate the gate.

3.1.2. Modes of Operation

To operate the gate to open fully, the D2 Turbo has three modes to
choose from depending on the application. Only one mode can be
selected at any given time.

3.1.2.1. Standard Mode

Standard Mode is the most commonly used mode for domestic
applications as it allows full control of the gate. Press the remote
control button for approximately one second to get the gate in
motion. If the remote control button is pressed while the gate is
page 5
Features
and
functions
FIGURE 4
FIGURE 5