Centurion Vector2 User Manual page 12

Features
and
functions
If you select Condominium Mode, your gate will open when
pressing the button of the remote control or the gate/door release
pushbutton on the intercom – but pressing the button again while
the gate is opening will be ignored. It will not cause the gate to
stop or to reverse. Only the internal Autoclose described on page
11 of this User Guide, which is automatically enabled, will close the
gate. If the button of the remote control or intercom gate release is
pressed while the gate is closing, the gate will immediately reopen.
The gate cannot be stopped in a midway position and will therefore
always close. If the button is pressed while the gate is in the open
position, the Autoclose timer (page 8) is reset.
The Autoclose Override feature described on page 8
cannot be applied in this mode
We highly recommended that you use protection beams
if you select Condominium Mode in order to prevent the
gate from closing on people, pets or vehicles
PIRAC (Beam Autoclose) described on page 11 can be
used with Condominium Mode
page 8