Table of Contents
Advertisement
4.1.1
Machine Problems
Check the status of your machine again before contacting us.
Symptom
The power is not
Is the power turned on?
turned on
Is the plug connected to a
receptacle?
Is the power cord disconnected
from the machine?
Touch screen is
Is the <Power Saver> button lit?
dark.
Is the Contrast adjustment dial
kept set to a darker value?
Is the backlight turned off?
A message is
A system error has occurred.
displayed
Has a paper jam occurred?
Is the message "Please wait..."
displayed?
Check
Turn the power on.
Refer
Turn the power switch and the power breaker off and connect the
power cord firmly. Then turn the power breaker and the power
switch on again.
Refer
The machine is in the Energy Saver mode. Press the <Power
Saver> button on the control panel to exit the Energy Saver
mode.
Refer
Use the Contrast adjustment dial to make adjustment.
Refer
The backlight lights up when:
A button on the control panel is pressed.
Refer
Refer
If the message is displayed for more than 5 minutes, contact your
local Xerox representative.
Remedy
"Power Source" (p. 30)
"Power Source" (p. 30)
"Energy Saver Mode" (p. 33)
"Adjusting Screen Contrast" (p. 35)
"Error Messages" (p. 96)
"When a Paper Jam Occurs" (p. 97)
4
4.1 Troubleshooting
89
Advertisement
Table of Contents
