Ipv6 Address Manual Set - Xerox Wide Format IJP 2000 User Manual

IPv4 - Subnet Mask
Enter the subnet mask in the format of xxx.xxx.xxx.xxx, where xxx is a value between 0 and 255.
The factory default is [255.255.255.0].
IPv4 - Gateway Address
Enter the subnet mask in the format of xxx.xxx.xxx.xxx, where xxx is a value between 0 and 255. The first "xxx"
cannot be set to numeric value 127 or 224 to 255.
The factory default is [192.168.150.1].

IPv6 Address Manual Set

To enter an IP address and Gateway address manually, select [Enabled].
The factory default is [Disabled].
IPv6 Address - Manual
Enter the IP address in the format of xxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx, where xxxx is a hexadecimal value.
You can fill in this field only when [IPv6 Address Manual Set] is set to [Enabled].

Note
You must enter an IP address before you can select [Save].

IPv6 Address Prefix
Set the IP address prefix in the range of 0 to 128.
The factory default is [64].
This option is enabled only when [IPv6 Address Manual Set] is set to [Enabled].

Note
IPv6 Gateway - Manual
Enter the Gateway address in the format of xxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx, where xxxx is a hexadecimal
value.
This option is enabled only when [IPv6 Address Manual Set] is set to [Enabled].

Note
You must enter a gateway address before you can select [Save].

IPv6 Address - Auto
This field displays the Link-local address, IPv6 address, and Gateway address that have been automatically
configured.
5.5 Network Settings
121
5