Billing Meters - Xerox Wide Format IJP 2000 User Manual

1.8
On the [Billing Meters] screen, you can check the number of printed pages measured by individual meters.
Steps
1
1.
Press the <Machine Status> button on the control panel.
2.
Press the [Billing Meters] tab.
3.
Check each meter on the displayed screen.
Meter 1
Area Count
Displays the sum total of the surface area printed in black
and white by the machine so far. (Unit: m
Length Count
Displays the sum total of the length printed in black and
white by the machine so far. (Unit: m or 0.1 m)
Meter 2
Area Count
Displays the sum total of the surface area printed in color by the machine so far. (Unit: m
Length Count
Displays the sum total of the length printed in color by the machine so far. (Unit: m or 0.1 m)
Serial Number
Displays the serial number of the machine.
Note

1.8 Billing Meters

48

Billing Meters

Whether to print in black and white or color is determined depending on the color mode of the print

driver. If data in black and white is set to the color mode using the print driver, it is counted as a color
print.
A test print is also counted. For information on test printing, refer to "3.3.1 Making a Test Print" (p. 77).

Job Status
Machine Status
Log In/Out
<Machine Status> button
2
)
Supplies Language Power Saver
Clear All
1 2 3
Stop
4 5 6
7 8 9
Start
. C
0
2
)