Xerox Wide Format IJP 2000 User Manual page 39

You can place the roll paper in front of the roll unit.

Note
4.
Pull up the handle of the paper holder (
paper holder from both edges of the core of roll paper (
5.
While pulling up the handle of the paper holder (
paper holder in both edges of the roll paper (
When installing the paper holder in the roll paper, put

Important
the roll paper on a stable place such as the floor to
prevent the roll paper from being dropped or toppled.
There are two types of paper holders: 3-inch core paper

Note
holder and 2-inch core paper holder (option).
Use the paper holder that meets the core size of the

paper to be loaded.
6.
Push down the handle of the paper holder to fix the paper holder.
7.
While holding the green lever of the roll unit, move the saddle to
adjust it to the width of the roll paper to be loaded.
), and pull out the
1
).
2
), install the
1
).
2
2
1
2
1
1.5 Loading/Replacing Paper
1
39