Table of Contents
Advertisement
8.
Make sure that the roll paper's winding direction is correct, and
place the paper holder onto the saddle.
1
9.
Rotate the roll paper, and insert the leading edge of roll paper
under the roller.
The roll paper is automatically conveyed and stops.
Note
10.
Press the paper cutter button to cut the leading edge of paper.
Note
11.
Remove the trimmed piece of paper.
12.
Gently push the roll unit back into the machine all the way until it
stops.
1.5 Loading/Replacing Paper
40
When the roll paper is not fed smoothly because its
leading edge is damaged, cut the leading edge using a
cutter knife or a similar tool before loading the paper.
If you press the paper cutter button once, 5.9 in. (150
mm) of the paper is cut. If you hold down the paper
cutter button, the paper comes out until you release the
button, and it is cut at the position where you release the
button.
Advertisement
Table of Contents
