Declaration Of Conformity; Supplementary Information - Sun Microsystems Sun Blade 100 Service Manual

Compliance Model Number:
Product Name:
EMC
USA—FCC Class B
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
European Union
This equipment complies with the following requirements of the EMC Directive 89/336/EEC:
EN55022:1995/CISPR22:1997
EN550024:1998 EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
EN61000-4-11
EN61000-3-2:1995
EN61000-3-3:1995
Safety
This equipment complies with the following requirements of the Low Voltage Directive 73/23/EEC:
EC Type Examination Certificates:
EN60950:1992, 2nd Edition, Amendments 1,2,3,4,11
IEC 950:1991, 2nd Edition, Amendments 1,2,3,4
Evaluated to all CB Countries

Supplementary Information

This product was tested and complies with all the requirements for the CE Mark.
/S/
Dennis P. Symanski
Manager, Compliance Engineering
Sun Microsystems, Inc.
901 San Antonio Road, MPK15-102
Palo Alto, CA 94303-4900, USA
Tel: 650-786-3255
Fax: 650-786-3723

Declaration of Conformity

202
Sun Blade™ 100
Class B
4 kV (Direct), 8 kV (Air)
3 V/m
1.0 kV Power Lines, 0.5 kV Signal Lines
1 kV Line-Line, 2 kV Line-Gnd Power Lines
3 V
3 A/m
Pass
Pass
Pass
DATE
TUV Rheinland Certificate No. S2055723
CB Scheme Certificate No. JPTUV-001881
/S/
Peter Arkless
Quality Manager
Sun Microsystems Scotland, Limited
Springfield, Linlithgow
West Lothian, EH49 7LR
Scotland, United Kingdom
Tel: 0506-670000
Fax: 0506 760011
DATE
vii