Sun Microsystems Sun Blade 100 Service Manual page 24

C.6
C.7
C.8
C.9
C.10 Motherboard C-22
C.11
C.12 Jumper Descriptions C-25
C.13 Enclosure C-26
D. USB Supplement 27
D.1
D.2
xxiv Sun Blade 100 Service Manual • October 2000
C.5.2 On-Board VRM C-12
C.5.2.1 On-Board VRM requirements C-12
C.5.2.2 Power-On Beep C-13
C.5.2.3 Power-On LED Control C-14
C.5.3 Optional Secondary Hard Drive C-14
Memory Architecture C-14
C.6.1 SDRAM Address Multiplexing C-16
C.6.2 DIMMs C-17
C.6.2.1 Speed and Timing C-17
C.6.3 SDRAM DIMM Configuration C-17
Address Mapping C-18
C.7.1 Port Allocations C-18
C.7.2 PCI Address Assignments C-19
C.7.2.1 PCI Bus A Address Assignments C-19
C.7.2.2 PCI Bus B Address Assignments C-19
Interrupts C-20
C.8.1 Interrupt Interface C-20
Power C-20
C.9.1 Energy Star C-21
C.9.1.1 Energy Star Power Consumption Tier 1 C-21
C.9.1.2 Energy Star Tier 2, Guideline A C-21
C.9.1.3 Energy Star Tier 2, Guideline B C-22
C.9.1.4 USB C-22
Riser Board C-24
USB Keyboard and Mouse 27
USB Power Management 28