Squelch Mode Setup - AnyTone AT-3318UV Instruction Manual

FUNCTION MENU SETUP
5TONE/2TONE: Current optional signaling is 5TONE/2TONE.
OFF: Close optional signaling.
4. Press key or

Squelch mode setup

This function is used for setting squelch mode to prevent receiving unrelated singals.
1. Press key, the top left corner of LCD displays "
menu.
2. Press / key to choose NO.07 function item, it shows "SIGNAL" on LCD.
3. Rotate channel switch to choose desired squelch mode.
SQ: When current channel receives matching RF signals, transceiver can hear
the talking from the other party.
CT/DCS: When current channel receives matching RF signals and matching CTCSS/
DCS signaling, transceiver can hear the talking from the other party.
TONE: When current channel receives matching RF signals and matching optional
signaling, transceiver can hear the talking from the other party.
CT&TO: When current channel receives matching RF signals+matching optional
signaling + matching CTCSS/DCS signaling, transceiver can hear the
talking from the other party.
CT/TO: When current channel receives matching RF signals, or matching optional
signaling, or matching CTCSS/DCS signaling, transceiver can hear the
talking from the other party.
32
key to confirm and exit.
" icon, then press key enter into function