MEMORY BANK
Bank linking
1. In channel mode, press
key to enter into function menu.
2. Press
key to choose menu 34, LCD show "BALK".
/
ON: Turn on Bank linking.
The following menus allow adding or deleting banks.
Menu 35 BANK LINK 1 ON/OFF
Menu 36 BANK LINK 2 ON/OFF
Menu 37 BANK LINK 3 ON/OFF
Menu 38 BANK LINK 4 ON/OFF
Menu 39 BANK LINK 5 ON/OFF
Menu 40 BANK LINK 6 ON/OFF
Menu 41 BANK LINK 7 ON/OFF
Menu 42 BANK LINK 8 ON/OFF
Menu 43 BANK LINK 9 ON/OFF
Menu 44 BANK LINK 0 ON/OFF
OFF: Turn off Bank linking, hide menu 35-44.
When bank linking is on, one or more banks can be added into scan list. In memory bank mode, enable the
scanning function, transceiver will scan the channels in current bank. During scanning, long pressing key
0-9 will add or delete the corresponding memory bank.
key twice to enter into memory bank mode, press
key then press
51