2Tone Encode Group Selection; Optional Signaling Setup - AnyTone AT-3318UV Instruction Manual

FUNCTION MENU SETUP

2TONE encode group selection

1. Press key, the top left corner of LCD displays "
function menu.
2. Press / key to choose NO.05 function item, it shows "2T-ENC" on LCD.
3. Rotate channel switch to choose desired 2TONE encode group.
CALL00~CALL31, 32 groups in total for optional.
4. Press [PTT] key to transmit selected 2TONE encode, press
2TONE encode must be programmed by software, only the groups with editing 2TONE can be
selected. When 2TONE encode is editing with name, transceiver will display name, otherwise
will display "CALL XX".

Optional signaling setup

DTMF and 5TONE functions are similar to CTCSS/DCS, it has special call
functions, such as ANI, PTT ID, All call, Alarm, remotely kill, remotely stun and
remotely waken, etc..
1. Press key, the top left corner of LCD displays "
key to enter into function menu.
2. Press / key to choose NO.06 function item, it shows "TONDEC" on LCD.
3. Rotate channel switch to choose desired optional signaling.
DTMF: Current optional signaling is DTMF.
" icon, then press
key or
" icon, then press
key to enter into
key to confirm and exit.
31