Page 1
SETTING THE AT-D578UV RADIO TO THE DESIRED MODE When you get the AnyTone mobile radio it might be set to a band you don’t really want. You might want to use it commercially with FCC Part 90 certification, so you set it to Mode 0 or 1.
Page 2
The following is the frequency allocation of the bands available in the AnyTone AT-D578UV Mode # VHF Frequency UHF Frequency 220 Band Tx/Rx 136-174 400-480 136-174 400-480 136-174 400-480 136-174 400-480 144-146 430-440 136-174 400-480 144-146 434-438 144-146 434-438 144-146...
Page 3
To change bands, go through the following steps: 1. Connect radio to power, turn on power supply and turn off radio. The radio should look like the following: 2. Press the P4 Key, Press the Channel Selector Switch, and press the power switch in that order.
Page 4
4. Keep the keys pressed and in a short time, the screen should look like this: 5. Now let go of the three keys and the screen should look like the following: COPYRIGHT BY CONNECT SYSTEMS INC. PERMISSION IS GRANTED TO DISTRIBUTE OR POST...
Page 5
6. A short time later the screen will change to the following: 7. Use the channel selector switch to change the mode from 00001 to 000018. When you get your desired mode, press the menu key and you are finished. 8.
Need help?
Do you have a question about the AT-D578UV and is the answer not in the manual?
Questions and answers
Setting date and time